I just set out my new GroBucket garden kit. Here is my GroBucket unboxing and setup article. So this will be a GroBucket review with live plants in it. And now we’re going to feed them and we’re going to talk a little bit about GroBucket fertilizer.
The pepper plant in the middle doesn’t look that happy the way the leaves are rolled but I think it will settle in in a few days.
It says in the GroBucket instructions to water from the top the first few times. I think the main reason for doing that would be to make sure your soil is well moistened and has settled so that the mixture in the reservoir can wick up properly. Also the roots are still pretty shallow right now.
- 1 Feeding Time For The GroBucket Garden Kit
- 2 What Is A GroBucket Kit?
- 3 GroBucket Soil Or Coco Which Is Best?
- 4 My GroBucket Garden Kit Uses Coco Coir
- 5 How To Feed Your Coco
- 6 GroBucket Fertilizer How Much To Use?
- 7 Why Not Give A GroBucket Garden Kit A Try
Feeding Time For The GroBucket Garden Kit
So ordinarily I probably would wait to feed and water because these plants were just absolutely soaked at the nursery. I mean they were way over watered, literally hosed and that’s probably what’s causing the leaf rolling on that pepper plant.
I brought out a bucket of nutrients and I have three gallons a nutrient solution here. I’m going to put a gallon through each bucket. I measured this with my TDS meter and my pH pen and right now these nutrients are about 450 parts per million and the pH is 6.2.
So it’s not a real heavy feeding. But it’s enough to get some nutrients into the coco and I’ll talk about that a little bit more as we go along.
I figure because my transplants were really wet the best thing to do is water it all around the edge and not soak the middle.
So each plant will get about a gallon water and most of that should perk down and fill the reservoir. This will help settle the coco down and get things off to a good start.
What Is A GroBucket Kit?
The GroBucket kit is used to turn a 5 gallon bucket into a subirrigated planter also called a self watering planter. The kit contains the insert, a feed tube and a water level indicator.
You will need to provide the buckets. Other than that you will need to drill one drain hole in each bucket. GroBucket kits come in 3 and 10 bucket kits.
GroBucket inserts form a small reservoir under your plant. You will fill in around the insert and then add more soil above it and then your plant or plants .
Wicking action pulls the liquid up through the soil where the plant roots are watered. The result is happy plants that are never over or under watered.
In my other video I talked about about why you want to use coco instead of potting soil but you can use anything you want. I mean it will all work, just some works better than others and not everybody gets the same results even from the same things.
How To Use A Growbucket Garden Kit The Right Way
The GroBucket garden kit is a self watering planter that takes advantage of wicking. It was designed to be fed and filled through the feed tube. You do add water from the top to settle your new plants in.
From that point on use the feed tube. Do not be tempted to just pour water into the top of the bucket. This would totally defeat the whole purpose of a self wicking planter.
No it wont likely kill your plants but they will be overwatered by the time you fill the reservoir and get some run off.
When you fill your GroBucket as it was designed to work make sure you add water until some runs out of the drain hole. This will help leach out any excess salts and refresh the water in the reservoir.
Also here is an article about it Growing Vegetables In Coco Coir Get Amazing Results
So anyhow while these were getting watered in I am not seeing the water level indicators rise up very much. But I can add more water later and they wont be drying out any time soon.
When you transplant it’s a good idea to keep things a bit on the dry side. It forces the plant to spread its roots and search for water.
GroBucket Soil Or Coco Which Is Best?
I want to talk to you about is couple of things. First up I did talk earlier about why I think coco is a better growing media but it’s your choice. You can use coco or you can use peat based media and either one will work.
But coco has much better wicking properties than peat based soil mixes. Since the GroBucket is a wicking planter it is the obvious choice. Coco really is not like soil and should be treated differently for best results.
Technically coco coir is a hydroponic grow media. It is basically inert and provides very little nutrition on its own so it needs to be fed. It also needs to remain moist for best results. That makes it a perfect choice for a GroBucket kit of any other self watering planter system.
My GroBucket Garden Kit Uses Coco Coir
The thing about coco it’s kind of a strange animal in that it holds on to certain nutrients more than others and sometimes that’s a good thing and sometimes it’s not.
The main thing you want to do with your coco is to pretreat it before planting anything in it. Because what you want to do is get some calcium and magnesium in there. Like I said coco coir is an inert hydroponic media. If you treat it like hydro it will really perform for you but if you treat it like soil you will be missing out on a lot.
Coco needs to be primed before you use it. I use CaliMagic from General Hydro. There’s other brands but I found that one to be the best. I use that to prime my coco and I add about 300 parts per million of that when I’m soaking my my coco.
I use Canna coco bricks. I don’t like to buy the big loose bags instead I buy the bricks. The bags are moist and can become a home for bugs. Bricks are bone dry and of no interest to bugs and also much easier to carry and store. You just throw them in a bucket with water and CalMag and they swell up. A brick makes about 5 gallons of coco.
I really recommend if you’re going to use coco use Canna it’s the best out there. If you buy cheap coco it could have a lot of salt in it and you’d have to leach all that out or it would ruin your plants.
How To Feed Your Coco
So if you’re going to use coco please use Canna Coco to get off to a good start. Then you’ll want to pretreat it with a little bit of CalMag. If you can, use CaliMagic from General Hydroponics. It’s pretty cheap and you can get it on Amazon. One ml per gallon works out to about 100 ppms
But during the time the plants are actually growing you will still probably need to add magnesium and the cheapest way to do that is to get Epsom salts from your grocery store or drugstore.
Half a teaspoon will raise a gallon of water 300 parts per million that’s the most you would ever want to put in one of these buckets at a time and your plants probably will need it every time you feed. Problem is it wont add calcium.
Some water has enough calcium and magnesium naturally but my water measures 30 ppm total so it is very soft meaning there are no minerals in it.
Reverse osmosis water measures 0 ppm. Many water systems in the US measure 150 ppms or more but I need to add minerals.
The thing is magnesium is in the center of the chlorophyll molecule and when your
plants get short on it they get yellow leaves kind of like what this pepper has.
It may be that, I really don’t know. Like I said they came from the nursery so I didn’t raise them I don’t know what they fed them.
I don’t know how well they took care of them but I know they watered the crap out of them so and they were sitting soaking wet in the shade and that’s not really a good thing.
So what I do is I add CaliMagic when I’m making up my coco and then I use some during the growing season.
But once I move into flowering and fruiting time I go over to the magnesium sulfate because the plants don’t need the added nitrogen that’s in in there.
The calmag formula has some nitrate nitrogen, it has calcium that has magnesium and a little bit of iron in it.
All in all it’s good but when plants are fruiting you want less nitrogen and so that’s what I’m going to talk about right now.
I am using this Jacks classic bloom booster 10 30 20 in flower. It almost has everything in it it but doesn’t really have calcium in it. It does have magnesium and this is a product that commercial greenhouses use.
You can use Miracle Grow but honestly it’s garbage they use really cheap ingredients. They use a lot of urea nitrogen which is harder for plants to take up. Basically it’s cow piss.
You want something like the 10 30 20 that has a profile like that because these are fruiting plants so they want more of the phosphorus and potassium and less of the nitrogen.
I don’t want to insult anybody’s intelligence here but I don’t know how much any of you know about growing. Some of you are probably advanced gardeners and some of you are just starting out. But for the sake of the gardening newbies here we go.
So the three numbers you see here are N, P and K or nitrogen, phosphorus and potassium and when you’re flowering stuff that fruits like peppers or tomatoes you want a low nitrogen number.
Now it doesn’t have to be exactly like 10 30 20. It could be 10 20 20 or something similar. But you get the idea, you you cut back on the nitrogen in flower. So it is readily available on on Amazon and it’s not real expensive plus a little goes a long way. You want to use something like this for tomatoes, peppers, squash and stuff like that that makes fruit.
The next thing I want to talk about is what kind of nutrients to use. These are synthetic nutrients. Now if your organic I’m going to tell you right from the get-go don’t use organic nutrients here.
I am NOT against organic growing I was growing organic vegetables back in the
70s when we were considered a lunatic fringe so I’m not down on organic gardening.
But to everything there is a season and these plants are sitting in a bucket. There’s a
gallon of water in the bottom and it’s going to get warm out.
If you’re putting organics in there it’s going to get warm and it’s going to grow bacteria. More often than not it will grow bad bacteria along with some good but you run the risk of getting Pythium or Phytophthora root rot.
Fortunately coco is fairly resistant to these diseases. It is inoculated with a good mold called Trichoderma that eats bad molds like Pythium. But at higher temperatures the risk increases.
Your GroBucket garden kit is probably sitting out in the sun and it has standing water in it. Water molds love to grow in warm water that’s not moving. You are risking getting root disease because these plants will eventually get through the insert and they will put roots down into the water.
If you’re running a mineral based nutrient there’s nothing for the bacteria to feed on really so you eliminate a lot of your problems.
Here is something I recommend to prevent this. I would really recommend using 3% hydrogen peroxide as a preventive no matter what kind of nutrients you’re using. Use it at a teaspoon of 3% hydrogen peroxide per gallon every 2 or 3 days.
That’s the stuff you get at the grocery store it’s 3%. It does come in other strengths so read the label. Use a teaspoon per gallon and put that down your feed tube every two or three days.
What this will do is kill any bad bacteria in there and it also gives off oxygen so it will aerate your roots which plants really like. You might even see a growth spurt after you use it.
That’s a preventative, it’s cheap, it’s easy to do and you can probably get a bottle of it for a dollar at the local dollar store. It will probably take you through the whole gardening season.
GroBucket Fertilizer How Much To Use?
You’re just going to feed the GroBucket garden kit normally down the fill tube after the first week or so. These are constantly being fed. Water is wicking up to the roots all the time.
Because your plants are eating constantly they need less food than a plant fed intermittently.
If you invest in a TDS meter and a pH pen you can measure what you are feeding your plants. I recommend 300 ppms for seedlings once they have their true leaves. 600 ppms for medium plants like transplants. Once your plants are established and stating to flower I would raise it to 800-1000 ppms.
For those who dont have this or dont want to test I would say no matter what brand of nutrients you’re using I would probably start at half the recommended amount. Look at your plants and see how they’re doing and adjust accordingly.
If they are really dark green they are probably being over fed and light green plants are probably being under fed.
Why Not Give A GroBucket Garden Kit A Try
The GroBucket garden kit makes a great way to garden. You dont need a green thumb to get great results with them either. They work indoors or out. They are so simple and easy to use with no moving parts and they dont need electricity either. They can make your growing easy because you will always know when to water and if you grow in coco you will see amazing results.